Guide

Dealership marketing campaigns: every trigger and block explained

A marketing campaign follows up with shoppers and owners for you: an email after a form, a text to your service list, a win-back after a missed test drive. This guide explains how campaigns work in QualiFlow, what every trigger and block does, what you check before you start, and why a message is sometimes not sent.

Last reviewed: By the QualiFlow AI team

The short answer

A campaign is a flow of blocks, read from top to bottom. It has exactly one trigger, which says what starts it. After that come actions (send an email, a text or a WhatsApp message, change a list or tag, give your team a task) and logic (wait, a Yes/No split, end). You build it on a canvas in the Campaign Designer, and nothing goes out until a person selects Start.

Campaigns are marketing. Your dealership decides who it markets to, and QualiFlow always honors opt-outs. Every marketing email carries an unsubscribe link, and every marketing text says how to stop. Aria's replies, booking confirmations and reminders are service messages. They are separate and follow their own rules. For the product overview, see dealership email and text campaigns.

This guide describes QualiFlow's own Campaign Designer, which is part of Ultra Flow and the plans above it. See QualiFlow pricing for what each plan includes.

When to use one

What is a campaign good for at a dealership?

Use a campaign when the same follow-up should happen for many people, and it is marketing rather than an answer to one customer. Four common ones:

New website lead follow-up

  • Trigger: Fills in a form.
  • Then: Send email, Wait 2 days, Yes/No split on whether they opened it. No gets a second email.
  • Aria still answers the form as usual. The campaign adds follow-up on top, and waits while that conversation is going on.

Welcome people who join a list

  • Trigger: Joins a list.
  • Then: Send email, Wait, a second email.
  • Start asks whether to send to the people already on the list too.

Service reminder to a list

  • Trigger: Send once to your service list, now or at a set time.
  • Then: Send text message.
  • For a rolling reminder, use A date comes up with the service due date.

Win-back after a missed test drive

  • Trigger: When a visit is missed, set to test drives.
  • Then: Wait 2 days, a text, then an email.
  • Aria's own no-show follow-up goes first. The marketing step waits for it.

You can start from a blank canvas, from a ready-made template (Preview flow shows its steps without creating anything), or by describing the goal in a sentence to Nora, the help assistant. Nora prepares a draft marked Needs review. She never starts, schedules or sends it.

Triggers

What can start a campaign?

Each campaign has one trigger. Send once goes to an audience you choose. Every other trigger starts for one person at a time, when something happens.

Every campaign trigger, what starts it and one example
Trigger What starts it Example
Send once You do. It sends to an audience right after Start, or at a date and time you set. Choose a list or smart list, pick contacts (up to 500), or filter by a field. A weekend offer to your "Truck shoppers" list on Saturday morning.
Joins a list Someone is added to a list, or starts matching a smart list. People who join after you start are included. A welcome email when a contact joins "Hybrid SUV shoppers".
Leaves a list Someone is taken off a list, or stops matching a smart list. Remove a tag when a contact leaves your "Lease ending soon" list.
Fills in a form Someone sends one of your forms. Follow up a test drive request with two emails, two days apart.
Walks in A walk-in is logged at the store. A thank-you email the day after the visit.
Books a visit A test drive, showroom visit, service visit or pickup is booked. You can pick the visit type. Tag people who booked a test drive so a later offer can skip them.
Attends a visit The customer came to the visit. A follow-up offer two days after a showroom visit.
When a visit is missed The salesperson recorded the visit as a no-show. A win-back text, then an email, after a missed test drive.
Buys a vehicle A sale is recorded as won. A thank-you, then a first service offer 30 days later.
New vehicle matches interest A new vehicle in your inventory matches what the contact wants. Tell hybrid shoppers that a matching vehicle has arrived.
Reaches a lead score The lead score goes up past the number you pick. It does not start when the score falls. Create a task to call a lead who reaches 80.
Lead status changes The lead moves to the status you choose. Add people to a win-back list when their lead is marked lost.
Opens an email The contact opens one of your emails. Notify the salesperson when a shopper opens the trade-in offer.
Clicks an email link The contact clicks a link in one of your emails. Create a task to call about the new arrival they clicked.
Leaves a review The contact leaves a review. Thank reviewers and add them to a referral list.
A date comes up A date on the contact is near: lease end or service due. It is checked once a day, and you choose how many days before or after. A reminder email 30 days before a lease ends.

Three things to know about triggers

  • Going through again. In the campaign settings you choose whether a person can go through only once, every time the trigger happens, or once every number of days you set.
  • Forms. A form can show an optional consent sentence or tick box. What the person chose is kept as a record. A campaign started by a form does not depend on it.
  • Coming soon. Two more triggers, Answers a survey and Visits a web page, are shown as coming soon. They cannot be started yet.

See a campaign built for your store

Book a free 30-minute demo, or try QualiFlow for 7 days.

Blocks

What does each campaign block do?

Blocks come in five groups: Send, Wait and decide, Update contact, Team, and Aria. Select a block to change its settings. A block that still needs something shows a red mark and says what is missing in plain words.

Every campaign block, what it does, its settings and one tip
Block What it does Settings Tip
Send email Sends one of the emails you designed in Emails. Which email, and its From: your own sending domain or dealership mailbox. Use Test (send to me) first. Pressing Start approves the email as saved; later edits wait until you select Start these edits.
Send text message Sends a marketing text. The line "Reply STOP to opt out" is added for you. Choose a saved text or write your own. Texting needs your business texting registration to be approved first. Start tells you if it is not.
Send WhatsApp Sends a WhatsApp marketing message that has been approved for your number. Choose an approved message. A new one shows Pending until it is approved. Only an approved message can be chosen, so get yours approved before you build the campaign.
Wait Pauses the person at this point. A length of time, or until a date. Leave a day or more between messages. The marketing limit counts every message.
Yes/No split Asks one question and sends the person down a green Yes path or a red No path. The question: opened or clicked an email in this campaign, a contact field, lead score, has a phone number or email, agreed to marketing on a channel, or booked a visit since joining. Put a Wait before a split on email opens, so people have time to open it.
End Ends the campaign for that person. None. End each path clearly, so Results show who finished.
Add to list, Remove from list Puts the contact on a list or takes them off. Which list. Adding to a list can start another campaign that uses Joins a list.
Add tag, Remove tag Adds or removes a tag on the contact. The tag. Tag people at key steps so you can filter them later.
Set lead status Moves the lead to a status. Which status. Use it after a clear signal, such as a booked visit, not after a single open.
Notify the team Tells a team member that someone reached this step. Who to tell (a person, the Owner or the contact's salesperson) and a short message. Use it for moments that need a person quickly.
Create a task Adds a task to someone's My Work, linked to the customer. Type, title, who does it, when it is due, priority and a note. Assign it to the contact's salesperson so the call comes from someone they know.
Aria follows up Aria starts a one-to-one chat with the person, using the instruction you write. Your instruction and the channel. Only an Owner can add this block. If Aria is not set up to answer customers, nothing is sent and the run says why.

Every block can have your own name and a note for the team. Double-click a block to open it in a large window with three columns: Input (what came in), Settings, and Output (what happened for a person you pick, including the exact message sent).

What can stop a message from going out?

Every campaign message is checked again just before it is sent. A message that may not go is skipped with its reason, and the person carries on along the campaign.

  • Do not contact. A person who asked not to be contacted, a wrong number, and an email address that bounced or was reported are left out. So is anyone whose marketing permission a team member withdrew on their profile.
  • Unsubscribe and STOP. Someone who unsubscribed from email or replied STOP to a text is skipped.
  • Quiet hours. A message due outside sending hours waits for the morning. It is not skipped.
  • The marketing limit. By default a person gets at most 3 marketing messages in 7 days, across all campaigns. The Owner can change it.
  • A real conversation. A campaign step waits while Aria or your team is talking to the customer, while a task or hand-off for them is open, or when they have a visit today or tomorrow.
  • The sender. Email goes from your own mailbox or sending domain, and texts from your dealership number. If the sender is not connected, the step says so with a link to fix it.

Start and results

How do I start a campaign and see what happened?

The Start box

Select Start and check three things: Who gets it, How many, and When. The count shows how many people can get it and how many are left out, with the reason.

  • If something is not set up, the header lists what is left to finish, and each row takes you to the block.
  • For a list trigger with people already on the list, Start asks whether to send to them too. The answer is Yes unless you choose No.
  • If some people will be left out, for example because they opted out or have no address, the box says so before you confirm.
  • Only the Owner, or a team member the Owner allowed, can start a campaign. Pause stops new steps and Resume continues.

Try with one person

On a running campaign, Try with one person runs it now for one contact you pick. It is a real send, so use a test contact and tick the box to confirm.

  • Opt-outs, quiet hours and limits still apply. If something stops the message, the pop-up says why.
  • Before starting, Test (send to me) sends each email to you. A test is never counted in the campaign.
  • After an edit to a running campaign, it shows Edits not started yet. People keep getting the started version until you select Start these edits.

Results

Results shows the totals at the top and counts on every block: how many entered, were sent, opened, clicked, unsubscribed and booked, and how many are waiting. A split shows how many went Yes and No.

  • Opens are an estimate, because some email apps open every email by themselves. Judge an email by clicks and replies.
  • Bookings counts confirmed appointments made within 14 days of the message. It followed the campaign. It is not proof the campaign caused it.
  • Select a block to see what was not sent and why.

People and Runs

People lists everyone who entered, where they are now and their outcome. Runs lists every time a person went through, newest first.

  • Open a run to see each step with its time and what happened: sent, skipped and why, waiting, Yes or No.
  • Show only problems lists errors and people who had a step skipped.
  • A held run says what it is waiting for and when it checks again.

Why not sent

Why was a campaign message not sent?

A skipped or waiting message always has a reason you can read. These are the ones you will see on a block in Results or on a step in Runs.

Reasons a campaign message is skipped or waits, and what to do
What you see What it means What to do
No marketing consent for this channel An older reason. It no longer happens for new sends, because marketing no longer needs a recorded permission. You may still see it on old runs. Nothing.
Unsubscribed or replied STOP They used the unsubscribe link, or replied STOP to a text. Nothing. Their choice is kept.
Address is suppressed An earlier email to that address bounced, or the person reported it. Check the address with the customer.
No email address or phone number The contact has nothing to send to on that channel. Add the detail to the contact, or use another channel.
Reached the marketing message limit They already had the most marketing messages allowed in the period (3 in 7 days unless the Owner changed it). Space your campaigns out, or have the Owner change the limit.
Out of plan credits Your plan's campaign emails or texts for the period are used up. Wait for the next period or talk to us about your plan.
The message to send is missing The block has no email, text or approved WhatsApp message any more. Open the block and choose the message again.
Waiting: quiet hours It is outside sending hours. The message is not skipped. It goes when sending hours start. Nothing. It sends in the morning.
Paused while Aria or the team is talking to this customer A real conversation, an open task or hand-off, or a visit today or tomorrow is in the way. The step waits and checks again. Nothing, or finish the task. Check again in the run looks right away.
The sender is not connected or not verified The mailbox, sending domain or number the message goes from is not ready. Select the link on the skipped step to open Connections, or contact support when it says so.

Safety rules

Which rules apply to every campaign?

  • You decide who you market to. QualiFlow does not ask for a recorded marketing permission. It always honors opt-outs: STOP, unsubscribe and do not contact.
  • Unsubscribe stops marketing email only. Service messages, such as appointment reminders, keep arriving, and the unsubscribe page says so.
  • STOP stops texts. A customer who replies STOP gets no more texts to that number, service texts included. Email can still reach them.
  • Quiet hours. Campaign messages go between 8 AM and 9 PM in your dealership's time zone. A message due at night waits until morning.
  • A limit per person. At most 3 marketing messages per person in 7 days by default, across all campaigns.
  • Your own sender. Customer email always goes from your dealership's mailbox or domain, never from a QualiFlow address. Every campaign email ends with your business name, postal address and a one-click unsubscribe link.
  • A person starts it. Aria and Nora can draft, but only your Owner or someone the Owner allowed can start a campaign.

These rules protect your customers and your sender reputation. They are not legal advice. Ask your own counsel how marketing rules apply to your store.

FAQ

Questions about dealership marketing campaigns

What is a dealership marketing campaign in QualiFlow?

A flow of blocks that runs by itself. One trigger starts it, such as a form, a list or a date. Then it sends emails, texts or WhatsApp messages, waits, asks Yes/No questions and gives your team tasks. Your dealership decides who gets it, and opt-outs are always honored.

Who can a campaign send to?

Your dealership decides who it markets to. QualiFlow does not require a recorded marketing permission on the contact. It always honors opt-outs: someone who replied STOP gets no more texts, someone who unsubscribed gets no more marketing email, and a person who asked not to be contacted, a wrong number or a bounced address is left out. The count before Start shows how many are left out and why.

What happens when a customer replies to a campaign?

The reply lands in the Inbox as a normal conversation, and Aria or your team answers it. With Exit on reply on, which is the default, the customer leaves the campaign so they do not get the next marketing step in the middle of a conversation.

Can a campaign send messages at night?

No. Campaign messages go between 8 AM and 9 PM. A message that comes due at night is not skipped. It waits and goes in the morning. The Owner can change the hours.

Why was a campaign message not sent?

Open Results and select the block, or open the person in Runs. Each skipped message has a plain reason, such as unsubscribed, replied STOP, the marketing message limit or a sender that is not connected. The table on this page lists them.

Can I test a campaign before it goes to customers?

Yes. Test (send to me) sends each email to you, and an Owner can send a test text. On a running campaign, Try with one person runs it for one contact you pick. That is a real send, so use a test contact.

Which QualiFlow plan includes campaigns?

The Campaign Designer is part of Ultra Flow and the plans above it. Smart Flow includes Aria, the Inbox and basic journeys, but not campaigns. The pricing page lists what each plan includes.

Illustrative dealership consultation beside a vehicle in a showroom

Keep the conversation moving

From the first question to the showroom, give your team the context to help.

Every lead gets a reply

Never leave a lead waiting until morning.

Aria answers, qualifies and books test drives around the clock, in English, Spanish and French, inside the rules you set.

Smart Flow · Card required. Subscription charges automatically after seven days unless cancelled; optional guided onboarding is charged upfront. Nothing goes out to customers until you connect your channels and approve Aria’s go-live checklist.